Illuminate Lighting

admin

3 Ways to Maximize Your Space

3 Ways to Maximize Your Space

by ·

Less is more with a small space, especially when you use what you have and buy intentionally. If you’re looking to use your space better or just go more minimalist, versatility is key. 

Not only is versatile design increasing in popularity (think tiny homes or vans converted to homes), it’s also better for the environment and your health. Researchers found those living a minimalist lifestyle experienced more positive emotions and a variety of “wellbeing benefits.” 

Investing in multi-use furniture, choosing more versatile lighting, and getting creative are 3 ways to use your space better so you can live with less and still feel like you have more.

1. Multipurpose Furniture

When you’re trying to create a more versatile space, the best place to start is furniture. Choose pieces that serve more than one purpose. Here are some ideas to create storage that will reduce clutter and the number of furniture pieces you’ll need.

Loft beds like this one give you double the space, allowing you to have a desk when you may not otherwise have room. You could also create a cozy setup like this!

If you have a larger bed, maximize your space using under-bed storage. Find a bed with drawers in the base or just use baskets (they serve the same purpose).

Benches are often underutilized pieces of furniture, but they shouldn’t be! They’re incredibly versatile and can go almost anywhere in your home. Have an unused wall or corner? Scour flea markets to find a bench. If it doesn’t have built-in storage, simply add a few baskets underneath for shoes, blankets, or other items.

This entryway setup creates a natural place for shoes and offers a place to sit while putting them on. Bonus: it’s small and would fit anywhere.

These wicker baskets act like an end-of-the-bed bench while also providing storage where you can tuck away extra pillows and blankets.

2. Choose Lighting that Creates Space

When you’re looking for other ways to make your home more versatile, upgrading your lighting is another quick and practical option. Changing up your lighting can save you space and make your room feel bigger. If you choose quality fixtures that last longer and use less energy, you’ll end up saving money in the long run, too.

Task lighting is essential in an office space. Ditch that desk lamp that’s taking valuable real estate on your work surface and find a flexible floor lamp that can be used as ambient lighting or as a reading lamp when you’re off the clock.

Instead of using a table lamp on your nightstand, consider hanging pendant lights above it instead! Visually, it creates space around your bed, making it look more open and airy. Plus, you’ll have more room for that stack of books you’re working on.

Small kitchen woes are no more with under-cabinet lighting. LED light strips are easy to stick on, and they’ll make your kitchen feel bigger and brighter. They also make your counter space more functional – nobody should be using a kitchen knife in the dark! 

Pro tip: Mirrors make your space look bigger! Place one near a window or a light fixture to reflect the light to create the illusion of a larger space.

3. Get Creative

Arguably the most important way to save space is to get creative! There are so many ways to use your space better, and there are lots of places to find inspiration. Look for wasted space in your home, and find design solutions that are versatile and solve multiple problems.

A common place to find wasted space is underneath the stairs. Getting it opened up and organized is a great way to get more bang for your buck. Drawers like these make use of every single square inch under the stairs! 

If drawers aren’t an option, find shallow shelving or hang hooks on the wall to create a space where you can throw all of those holiday decorations you only see for a month at a time. 

If your kitchen space is small and you’re short on storage options, put your empty corners and walls to work. This 3-tiered cart does double duty as a plant stand and extra kitchen storage. The wooden crates also double up – serving as both a decorative element and open shelving for larger kitchen items that would otherwise take up valuable cupboard space.

Another way to add visual interest while creating storage is hanging up floating shelves. Open shelves like these are a great place to put your favorite kitchen-wares on display where they can be easily found when it’s time for a mid-afternoon coffee break. 

Open shelving also works great in the bathroom. Use them to store bulky bath towels, or buy decorative baskets to hide away all of that countertop clutter when you’re not getting ready for the day.

Closet busting at the seams? Make your closet space work for you with organizing systems that save space, like these drawers and slide-out racks. 

Maximizing Your Space

This tiny home is a perfect example of these tips in action. The multi-use kitchen set can be folded away and used for extra guest seating. Natural light and interior lights combine to keep shadows at bay, making a small footprint feel open and airy. Creative storage options are tucked into every square inch. 

You don’t have to be making the most of a tiny apartment to take advantage of space-saving and space-creating design tips. Just remember – when you’re trying to maximize your space, everything you have counts. Make sure everything you have is intentional and serves at least one purpose – hopefully more!

To learn more about creative lighting solutions that will help you maximize your space, stop by Illuminate Lighting’s showroom! We’d love to chat and help you find what you need to get started.

 How Light Bulbs Changed the World

 How Light Bulbs Changed the World

by ·

Imagine waking up to the light of the sun in 1850. It’s summertime, around 6 am. You go downstairs, stoke the fire and get breakfast together as your children start to wake. Outside thunderhead clouds are heading towards you, darkening the land. Lighting a few lamps, you prepare for a quiet afternoon inside, knitting and sewing with your daughters while the boys wrestle in the flickering light. It rains all day. You’re running low on kerosene oil, so off to an early bedtime. Maybe tomorrow will be brighter, less restricted.

In a world of modern conveniences, it’s easy to take something like our control of light for granted. Did you know that lightbulbs have been around for less than 150 years? Revisiting the history of home lighting may inspire you to see your home with new eyes.

Before the Light Bulb

For thousands of years, humankind has lived according to the cycle of the sun and moon. The earliest humans relied on fire and learned to control it over time. Wax and oil made fire portable and practical through the use of torches, candles, and lamps.

This “domestication” of fire spurred innovation. There were more hours to use in the long dark winters, which gave humans time to craft and study. Still, firelight wasn’t nearly as bright or even as the sun. It produced a lot of heat, required care to keep alive, and created black smoke and soot. 

Fire was far from a perfect lighting solution. Inventors around the world continued to pursue a better solution without much success. It wasn’t until the 19th century that inventors saw progress with electricity and light. 

The Invention of the Light Bulb

The first successful version of electric light was achieved in 1835. This bulb, called the arc lamp, was invented in London and was popular in street lighting. Although it was a huge step forward in the development of electric light, there were still plenty of technical problems to solve. The arc lamp was extremely bright and hot, so it had to be on high towers for safety. The glaring light made it impossible to use in the small rooms of private homes. Even in the 1800s, critics were wary of the invasion of technology into private life. More work needed to be done.

More than forty years later, Thomas Edison successfully created a light bulb that wasn’t excessively hot or bright. He invented the first incandescent bulb in 1879 in New Jersey. These bulbs used electricity and gas to sustain the slow burn of filament. The light was powerful enough to light a room. 

The incandescent bulb changed the world. The ability to have consistent, clean light on demand meant that hospitals, schools, governments, businesses, and the public could control their work. Its use was able to increase health, safety, and productivity. 

It wasn’t until the mid-20th century that incandescent bulbs were commonly used in middle-class homes, decades after the death of the brilliant inventor Edison. The evolution of electric light was far from over. As incandescent light bulbs became commonplace, energy consumption greatly increased and we began to record harmful effects to the climate. Once again, we needed a new light solution.

Evolution of EcoFriendly Bulbs

Now imagine it’s 1950. You’ve moved into a new home in “Leave it to Beaver” suburbia. White picket fences, green lawns, neat houses, all wired to the now publicly available electricity network. You pause and think back on your childhood, the challenges of life before this technology. You smile. This is a new world for your children. You flip the switch on in the family room to spend some quality time together.

As the general population adopted the use of electric light, energy consumption skyrocketed. This increase in demand for energy production started to impact the environment, as the most common energy production was the burning of coal and natural gas. The effects of global warming came to a head and we looked for ways to reduce our impact on the world. Although the groundwork for fluorescent and LED bulbs was laid long before our awareness of global warming, they turned out to be the key to energy-efficient lighting. 

Fluorescent Bulbs

Several inventors got to work on fluorescent lighting, the process of passing electricity through the gas to create light. Even Thomas Eddison had a version of fluorescent light, although his was never mass-produced. George Inmann of General Electric finally secured a patent for a commercial version of the fluorescent light. This light was first sold in 1938, around the same time the incandescent light became a common household appliance. 

Fluorescent light bulbs were first designed as long tubes, typically used in offices. A modified design adapted them for home use: a slim spiral tube the size of an incandescent bulb. These bulbs grew popular in the early 2000s. Fluorescent bulbs are much more energy-efficient than incandescent bulbs. Yet, many were wary of their use in homes because they contain mercury. Many families wanted to avoid the risk of broken bulbs.

LED Bulbs

The technology behind LEDs (light-emitting diodes) began back in 1907, when a British man named Henry Joseph Round experimented with a cat’s whisker and silicon carbide, somehow generating light. Several other inventors tried to harness LEDs, first succeeding in creating invisible infrared LEDs, then finally achieving visible red light in 1962.

LEDs have evolved to emit every color, are highly adaptable, and maintain popularity today. LEDs use a microchip to produce light instead of burning filament or gas, and are popular in both bulbs and strip lighting. The microchip design means LEDs are colorful, adding “fun” and “versatility” to “eco-friendly”. And, no mercury!

Light in Creating a Home

Back to today. Your home is custom lit in every space. It’s a beautiful summer night. The kids are in bed, the soft, warm glow of fairy lights giving them comfort. You lock the front door and see your walkway lit by solar-powered footlights. You turn off the lights in the kitchen, except for the cabinet lighting, which offers a gentle glow into the living room. You snuggle up with your partner to catch up on your favorite show.

We live in an era of ultimate convenience. Gone are the days when the weather or seasons dictate what we do. Modern technology has allowed us to use light to optimize health, safety, and design.

Despite all of the incredible things the light bulb has done for us, we will never fully be able to remove ourselves from the influence of the cycles of the sun and the moon. Much like our ancestors who lived life by the firelight, our bodies still rely on the cues of daylight and dusk to regulate our hormones and sleep cycle.

Modern innovators have developed a spectrum of bulb “temperatures”. The temperature, or wavelength, of light mimics either sunlight or firelight. Bright, cool light acts like the sun and is excellent for workspaces, like kitchens and home offices. Softer warm light sources are closer to firelight, and help our bodies to relax and prepare for sleep. It’s excellent for bedrooms, reading lamps, and by bathtubs. 

The right light sources also help to protect our family and home from accidents and theft. Strip lighting along stairs is great for preventing falls. Motion-activated lights outside have protected families for decades by preventing nighttime theft.  

Beyond function, light design controls the feel of your home. Two hundred years ago, pioneers and frontier families had the same, functional log cabin. Today light gives us all the opportunity to customize our homes to our family needs and interests. Simply upgrading the existing, builder-grade lights makes your home feel like it’s yours. Strip LEDs under your kitchen cabinets increase visibility, make it feel bigger, and upgrade it to a first-class workspace. Installing pendant lighting in the bedroom increases style and decreases chord clutter. A unique chandelier brightens your home office and helps you relax in a space that’s really you.

It’s incredible how much light has changed the world.

——————–

Talk with the Pros

With all the technology and styles available to you, it can be hard to know how best to take advantage of this era of light. Illuminate Lighting offers a great selection of not just bulbs and fixtures, but also professional lighting advice from experts in the lighting industry. If you’re ready to start lighting your home, stop by our showroom and we’ll help you find exactly what you need.

How Light Bulbs Made the Industrial Revolution Possible

How Light Bulbs Made the Industrial Revolution Possible

by ·

The Industrial Revolution was marked by invention, early machinery, and mass production. Likewise, modern methods of supplying fuel, preserving food, producing clothes, and providing health care began with the Industrial Revolution. And a crucial common factor across the modernization of these industries? 

Light bulbs.

Let’s set the stage. As the global population increased in the 1800s, a vicious cycle emerged. With more food, medicine, and shelter available, more children survived to adulthood. More adults meant more families with children, creating greater demand again. So over and over, more people were born and lived longer than before and increased demands on the global economy.

As early supply chains attempted to provide basics to the growing population, its success led to more people surviving.

The Industrial Revolution characterizes an era of inventors, undoubtedly fueled to relieve suffering and improve old methods. In short, it was an attempt to tame this cycle by providing more goods faster, easier, and in better conditions.

But the trouble was, demands for goods often rose faster than was safe to produce them. As a result, many industries struggled to find ways to increase production, but the light of a candle could only go so far into the night, and it came with dangerous risks and consequences.

Coal Miners: The Backbone of the Industrial Revolution

Let’s start with some of the most heavily relied-upon characters of the Industrial Revolution– coal miners. As demands for residential heat grew, so did the need for fuel for factories and trains.

Coal miners dug deep underground to supply the world with the required fuel. It was dangerous work, not only because of the use of explosives underground but because it was so dark. Lack of proper light made accidents common and kept production slow.

Candlelight was the only source of artificial light then. This posed a problem because mines often release flammable gases. The slightest fire exposure in the tunnels regularly resulted in explosions with hundreds dead. Inventors tried– but were unsuccessful– to create proper fire shields. As the need for coal grew, so did the number of fire-related incidents and deaths in the coal mines.

Reducing Fire Risk in Textile Factories

Another significant mark of the Industrial Revolution was the beginning of mass-produced clothing. Before factories existed, most clothing was tailor-made for each family member. Wealthy families hired sewists, and low-income families made their own clothing.

Textile factories promised to speed clothing production and free up time for other work. But unfortunately, textile factory workers faced a similar problem to that of the coal miners. 

Before making clothing, cotton had to be spun into thread, then woven into fabric. This fabric would then be cut into patterns and sewn into finished clothing. The system of processing cotton led to very dusty rooms filled with tiny floating pieces of raw cotton. Even the smallest flame could catch the floating cotton, creating a runaway fire in moments. These fires took down entire factories in moments, often with few survivors.

Unlike the miners, textile workers could use the light of day through windows. But there was little sunlight in rainy regions or during the winters. So textile production had to slow or risk the use of candlelight according to the weather or season.

Here again, the invention of the electric light bulb allowed for safer work and better conditions for these workers. Electric light reduced the strain on workers and evened out available work hours. The growing population could now count on having enough clothing.

Impact on Food Preservation

The United States population exploded between the 1800s and 1900s as territory expanded. Consequently, the demand for food increased with these settlements and cities.

People’s access to food in the early 1900s was determined mainly by what they could grow themselves. You would eat some of the fresh food you could grow during the summer and store the rest to survive the cold winters. As a result, starvation was a constant threat, and malnutrition was common.

During the Industrial Revolution, many factories opened and started to mass-produce canned food. While canning factories did not risk the same dangerous fire as miners and textile workers, they still had limited light.

Enabling Quality Healthcare

Finally, light bulbs improved the quality of healthcare in hospitals around the globe. The 1800s showed a marked increase in understanding human anatomy and how to save a person’s life after a severe injury.

However, medical attention requires detailed work, and poor sanitation and techniques cost thousands if not hundreds of thousands of lives. Even the simple fact that candles and firelight distort color made it difficult for early medical professionals to accurately gauge a patient’s health status. 

Beyond surgeries, hospital care, or home visits, the development of new medicines was also limited before the Industrial Revolution. For example, penicillin was developed in the 1920s – 1940s and is widely regarded as the first true antibiotic. The drug was developed through the work of many scientists observing bacteria cultures in universities, and it saved countless lives during World War II alone.

Although light bulbs alone did not allow for the creation of penicillin, the availability of consistent light (partnered with microscopes and other technology) is clearly linked with a massive spike in new medication since the early 1900s. 

Lightbulbs: The Unsung Hero of an Industrialized World

We owe our modern, comfortable world to many inventions of the late 1800s and early 1900s. Still, there is no doubt that none of them would have been as successful without the invention of the electric light bulb. And so, the ordinary light bulb is the unsung hero of the modernization of the world.

So, the invention of the electric light bulb created the possibility of an industrialized, modern world– a world where people had enough heat, food, and medicine. The light bulb allowed for safer working conditions and paved the way for other inventions that advanced humanity as a whole.

Electric light provided bright, steady light for miners without a significant risk of explosion. As a result, artificial light significantly reduced the number of deaths. As a bonus, it also allowed them to work faster. Thus, miners could better fuel the world, unleashing the Industrial Revolution.

Food production through factories was unleashed with electric lights. The world now had an efficient and cheap process to provide food that could last months or years on the shelf.

As one could imagine, electric light significantly improved healthcare quality. Surgeries were performed with much better lighting, and follow-up care received better attention. Doctors and nurses could discover infections faster and perform precision work with accuracy.

Aside from hospital care, proper lighting enabled the creation of new medicines and techniques. Electric lighting was not the only factor to decrease medical-related deaths. Still, the widespread availability of steady light enabled doctors and scientists to make significant strides in proper care.

—————

At Illuminate Lighting, we are proudly following in the footsteps of these early lighting engineers. We are just as passionate about lighting the world as they were as we supply homes and businesses with the latest designs and functionality. Talk with an expert at Illuminate Lighting today to get custom advice on your lighting needs.

Ceiling Fan Terminology Explained

Ceiling Fan Terminology Explained

by ·

A Helpful Glossary of Common Ceiling Fan Terms

If you’re shopping for ceiling fans and it’s starting to feel like the descriptions are written in code, don’t worry! We’re here to solve the mystery with a list of basic terms you’ll need to know when looking for the right ceiling fan.

Ceiling Fan Types

Ceiling fans are most often categorized by their motor type, mount type, and/or weather rating. 

Motors

AC and DC Motors

AC motors (alternating current motors) are the most popular ceiling fan motor. They’re typically less expensive than DC motors, which is great for budget buyers. They are relatively energy efficient, are very reliable, and come with around three to four different fan speeds. 

DC motors (direct current motors) are a newer technology and often use a remote instead of a wall switch. DC motors make a quieter, more powerful fan with more speed options and are more efficient than AC motors. 

Dual Motor

Dual motor fans have two adjustable fan heads attached to a central motor. Each head is adjustable to its own speed and angle. 

High-Velocity Motor

A high-velocity fan is a powerful fan. It produces a higher-than-normal amount of airflow, providing you with a stronger breeze. 

Mounts

Downrod/Shank/Extension Rod

The multiple terms for this accessory are purely regional, and all mean the same thing– the rod or bar installed between the ceiling and the fan. Downrods can be used in many rooms but create the most impact in rooms with high ceilings. Not only do they pull the eye upwards and make the room feel bigger, but they also bring the air circulation closer to you.

Standard Mount

This type of mounting system is for level ceilings. Standard mounts usually come with a 3- to 5-inch downrod, so the fan slightly hangs down into the space.

Hugger or Flush Mount

These are perfect for low ceilings and tall people. Huggers are mounted against the ceiling and don’t use a downrod. Depending on the ceiling height, huggers or flush mount fans can help the ceiling seem higher while keeping your air circulated and fresh.

Low-Profile Fan 

For a fan to be considered low-profile, it must hang down less than 12 inches from the ceiling. Most low-profile fans are flush mounts, but some fans with short downrods are small enough to qualify as low-profile as well.

Sloped Mount 

A sloped mount is a mounting system that includes a downrod that allows the ceiling fan to be installed on a vaulted or slanted ceiling. The base is designed to let the downrod and fan hang at an angle when mounted so that the fan will be perpendicular to the floor.

Rating

Wet Rated or Outdoor Rated Fans 

Outdoor or wet rated fans are designed to withstand direct contact with rain and snow. Carefully read the packaging of your outdoor fan because not all fans can handle the same weather exposure. If you live in a particularly wet or stormy area, you’ll need a tougher outdoor fan.

Industrial and Commercial Fans

Industrial fans have powerful motors and curved blades, and they can run continuously, making them ideal for large, open areas like warehouses and gyms. Commercial fans are heavier-duty than standard fans and more aesthetically pleasing than industrial fans. They’re commonly found in schools, businesses, and restaurants.

Ceiling Fan Measurements 

This section covers the most common measurements used to describe a ceiling fan’s function and size.

Airflow (CFM)

Cubic feet per minute (CFM) refers to the amount of air moved by a ceiling fan, using the amount of air moved per cubic foot in one minute as the metric. The higher the airflow a fan uses, the more efficient your home can be as you recycle heated or cooled air. According to Energy Star, 75 CFM is the minimum airflow of an efficient ceiling fan.  

Blade Pitch 

The pitch measures the angle of the blades compared to the ground. Fan blades are slightly angled to push the air around. (If they were parallel to the floor, they wouldn’t do much!) The angle of blade pitches typically ranges between 10 and 25 degrees, but the most efficient is from 10 to 15 degrees. 

Blade Sweep or Span 

A fan’s sweep or span measures the diameter of the circle created by the blades. You’ll need to know the span of your fan to make sure it will fit properly in your room – if it’s too large it could scrape walls or snag curtains. On the other hand, it may be distracting and look out of place if it’s too small.

Motor Speed (RPM)

Revolutions per minute (RPM) refers to the speed of the blades as they rotate, measured by how many times the blades make a complete circle in one minute. High RPM fans move more air than low RPM fans of the same size, making them more efficient. 

Watt Equivalence

Some fans will require more electrical power (watts) than others, so it’s essential to have a good understanding of how much strain your new fan will put on the existing circuit. A good rule of thumb is the longer the fan blades, the more watts it will use. Expect your fan to use 55 to 100 watts.

Weight

Residential ceiling fans typically weigh anywhere from 8 pounds to 50 pounds. Keep in mind that lightweight ceiling fans are designed to hold their weight alone. You should never add anything to a ceiling fan that wasn’t in the original kit without carefully reading the manufacturer’s instructions. Some ceiling fans allow for customizable light kits. In that case, be sure to check the packaging for how much additional weight it can hold.

Number of Speeds

Most ceiling fans will have multiple speed settings so that you can control the amount of airflow and circulation in your space. Most fans will have three speeds (slow, medium, and maximum speed). You’ll also want to see if your fan can reverse direction– this will help pull warm air down from the ceiling during the winter and help to cycle your heated air.

Dimensions

You’ll need to check several measurements to ensure your fan fits correctly in the space. For example, both depth and width can refer to the blade span (or the size of the circle the fan will make). The width can also describe how wide the individual blades are. Finally, as mentioned earlier, the downrod is the pole that connects the fan to the ceiling mount. Together, these three dimensions will tell you how much space the fan will take up.

Pro tip: All fans are designed for specific square footage, meaning that some are designed to push air through large rooms while others are for small rooms. Fans designed for bigger spaces would be disruptive in a smaller room (and vice versa). The packaging of your fan will tell you the intended size of the room, so make sure to check the square footage of the intended space and match it to the appropriate fan. 

Parts and Accessories 

The final section describes potential upgrades and customization options to consider while shopping for your ceiling fan.

Light Kits

Many fans come with a light fixture attached (called an integrated light), but some can be purchased and attached depending on the fan. There are three different light kits that you can use with your fan: uplight kits which sit on top of the fan and point upwards, branched or stemmed kits use globes or shades that point up or down, but the most common light kit is the bowl or shade kit which attaches to the bottom of the fan. Keep in mind that some ceiling fans with an integrated light may not include a bulb– you may need to purchase bulbs separately.

Remote Control

Many fans available today are remote control or smart-home compatible. A remotely controlled fan may seem like a luxury, but it’s also very practical – especially for those with extremely high ceilings! Depending on the model and features, you’ll be able to adjust the lights, fan direction, and fan speed with ease. 

Reversible Blades 

Some fans allow for their blades to spin either clockwise or counterclockwise. This functionality helps to customize airflow according to the season. For example, the blades should turn counterclockwise in the summer to push the air down (a downdraft), providing cool breezes.  The fan blades should rotate clockwise to pull air upwards (an updraft) in the winter, efficiently recycling heated air without cooling the room. You can either toggle the switch on the fan or use a remote to change the direction of the blades. 

———————-

Ready to switch out your builder-grade fan or install a new one in the place of an existing light fixture? Now that you have a reference to all of the features and parts of a ceiling fan, you can shop confidently.

If you’d like additional information, a professional opinion, or installation assistance, contact the experts at Illuminate, and we’ll make sure you get exactly what you are looking for! 

5 Easy Steps to Create a Modern Minimalist Interior

5 Easy Steps to Create a Modern Minimalist Interior

by ·

With an intentional lack of furniture and decorations, minimalist design can sometimes come off as cold and uncomfortable. Over the past few years, as we’ve spent more time in our homes than ever before, the need for comfort in a home design has been made crystal clear.

Today’s modern minimalism prioritizes simplicity with a decluttered and uncomplicated aesthetic, while also emphasizing the need for comfort in a space. You’ll see more color and accessories than the minimalist interiors of the past had, but they’ll be thoughtfully chosen extras that provide warmth and life to the space without going overboard. 

Whether you’re interested in adopting a minimalist lifestyle or just love the simple yet dramatic design aesthetic, modern minimalism is an achievable aesthetic for just about anyone! 

To help you get started, we broke down the basics of modern minimalist interior design into a handful of easy steps you can use to confidently focus on the right essentials. 

1. Create an Open Floor Plan

Focus on creating as much connected open space as possible. Obviously, taking out walls is the easiest way to create an open floor plan. But if you’re not in a place where you can tear down walls, there are some simple and subtle tricks you can use to make adjoining spaces feel more connected. 

One way to connect spaces in your home is to use the same flooring and wall paint colors for the entire space. This will make rooms look like they belong together, even through a doorway. 

A unique accent, like this minimalist pendant light, grabs your attention through the doorway from across the way, which helps your brain perceive the two spaces as one.

Finally, play around with your furniture placement to maximize your space. In smaller spaces, this often means keeping large furniture close to the walls to keep open pathways throughout but don’t underestimate the power of a simple, low-profile, floating sofa used to define a space.

2. Choose a Small Color Palette

A classic hallmark of minimalist design is a neutral monochromatic color palette, typically in warm grey, white, or beige tones. Contrast is important – add dimension and balance with a mix of darker and lighter shades within your color palette.

If an all-neutral color palette just isn’t your thing, you can still get a modern minimalist look with color – you just need to stick to a small palette. Keep most of the colors you use very light, to increase the feeling of airiness and reflect light best. 

3. Functional Design is Key

It doesn’t matter how pretty a room is, if it’s inconvenient or difficult to use you’re not going to be happy with it. When you’re trying to adopt modern minimalism, understanding how to pare down to only the essentials can be hard. When you’re going through your room, ask yourself:

 “Does this serve a purpose?”   “Do I already have something that serves this purpose?”   “Is there a multipurpose option that will serve this purpose and others?” 

Just remember, there’s no hard and fast rule for what it means to be “functional” – and you don’t need to justify every item you love to keep it in your home. A funky decorative pillow that makes you smile when you see it is serving a purpose (and it’s making your couch more comfortable – so it’s multifunctional!) 

A huge part of functional design is organization. Decluttering for a modern minimalist space involves reducing “visual clutter” too! Things not actively being used should have a home where they can be tucked away until they’re needed. 

Opt for storage options that have doors that will hide the things you’re not using.  When styling open shelving, choose items that match your color palette, leave plenty of open space, and use boxes or baskets to organize and hide loose items.

Don’t be surprised if you get down to the basics and you aren’t in love with what you have left. You’ll likely need to start making smart trades here and there to end up with a set of basics that you love.

4. Add Light – Lots of It

Like most modern design aesthetics, modern minimalism focuses on filling the space with light. Where possible, introduce as much natural light as you can. The light colors on your walls and floors will reflect it – making your room feel open and airy. 

In addition to natural light, a modern minimalist space needs a well-thought-out interior lightscape. Make sure your general ambient light is bright without being harsh, and add extra lighting in dark corners and over workspaces. Hidden lights, like LED strips under a cabinet, are an inexpensive DIY trick with a big payoff! 

Because minimalism is all about doing less with more, it’s okay to be choosy about how you add light to your space – you don’t want to clutter up your home with a floor lamp in every dark spot! When you’re shopping for fixtures, stick to simple shapes that can double as design elements.

5. Finish it Off with Thoughtful Accents

Little pops of color and texture are what take a modern minimalist space from blah to wow. You can do this in a number of ways, but remember to keep it simple. Start with just one color or texture and see how it feels before committing to more. 

When possible, look for ways to upgrade your existing decor rather than adding extra items. Look for functional pieces that you need in your space, but feel a little lackluster, and find a more interesting alternative. Replace an old, overstuffed sofa with a simpler version in a deep color (as long as it’s in your color palette!) or give an old end table new life with a coat of paint.

Pro Tip: If you have a hard time committing to color, consider using houseplants! They introduce a vibrant green color and soft, organic textures, which can balance out a minimalist design quite nicely.

By far, one of the most effective ways to accent a modern minimalist design is with an interesting light fixture. Your room will always need light, so it might as well be an integrated part of the design! 

A stunning ceiling light with a simple shape will stand out as a piece of art against a minimalist backdrop and elevate the entire design of the space. 

Pendant lamps are popular in modern minimalist design because they come in simple shapes with lots of finish options, so it’s easy to find something that will match your aesthetic. 

If replacing a ceiling fixture isn’t an option, you can get a similar impact with a carefully chosen floor lamp! Lamps are the MVP of accent lighting for a reason – they’re easy to move, replace, and rearrange, and come in a HUGE variety of styles. You can go for something small that blends in, but we also love the way a large, yet simple, lamp like this one makes a statement without taking over. 

That’s all there is to it! Just to recap, here are the 5 easy steps to create a modern minimalist interior: 

  1. Create an open floor plan – Tie separate spaces together with color and materials and rearrange furniture to maximize your space.
  2. Choose a small color palette – Neutrals are your friend, but it’s okay to add in a little bit of color to make your space feel like you.
  3. Remember functionality – Use multipurpose furniture, and organize, organize, organize. Store things that aren’t being used so that they’re not cluttering up your space.
  4. Add light – Having lots of natural and indoor lighting is what makes your space feel open and airy. Light up dark corners and workspaces.
  5. Finish it off with thoughtful accents – Don’t over-accessorize. Pops of color and texture give life to a space, but try to incorporate these add-ons with the functional elements of your space – like a colored sofa or an upgraded light fixture.

——–

Modern minimalist design can be a difficult concept to balance, but it’s very forgiving and so beautiful when done correctly. If you need help finding the right lighting for your modern minimalist home, our experts at Illuminate Lighting can help!

How Many Blades Does Your Ceiling Fan Really Need?

How Many Blades Does Your Ceiling Fan Really Need?

by ·

Ceiling fans are great at providing comfort year-round. A good ceiling fan will help you save on energy costs by circulating the air in your home. In the summer they create a draft, making the room feel cooler. In cold weather, you can switch the fan’s direction to circulate warm air from central heating around the room. 

Ceiling fans are so ubiquitous that for many people it’s hard to imagine life without one! So what happens when your fan breaks, and it’s time to get a new one? 

If you’ve shopped for ceiling fans recently, you know that there are a lot of options. From the ultra-modern models with a single fan blade, to the “windmill” design fans with so many blades that there’s hardly any space between them – many homeowners on the hunt start to ask: 

How many blades does my ceiling fan really need? 

Does the blade count actually change anything, or is it just for aesthetics? 

In short, the answer is “yes to both.” The blade count on a ceiling fan is largely viewed as a style issue, but it does impact the way the fan works. Apart from the obvious design differences, the number of blades on a fan will also affect its noise level and energy consumption. 

Noise Level

The fewer the blades, the faster a fan needs to spin to move the same amount of air. Lots of spinning means lots of moving parts, which usually translates to more noise. Take large industrial fans, for example – they typically have two or three blades and are pretty loud. 

On the other end of the spectrum, fans with higher blade counts can move a lot of air spinning at a slower rate. Less motion means less noise – windmill-style fans with eight to ten blades are virtually silent. 

There isn’t an exact cutoff between noisy versus quiet fans, but a good middle range is around five. If you want a quieter fan, one with five or more blades will likely be your best choice. 

Energy Efficiency

Another thing to consider when choosing a fan is how much it will cost to run. Fans with more blades create more drag, requiring more energy to operate. This is one reason why large, always-on fans (like you’d see in a commercial space) often only have three blades. They may be a bit noisier, but they save on energy costs.

While its blade count does impact the energy efficiency of a fan, it’s definitely not the only factor involved. The efficiency of fans can also be affected by the length and angle of the blades and by the type of motor it uses. It’s best to check the energy rating of your fan when possible. 

Style and Aesthetics

Aside from energy efficiency and noise level, the main difference between fans with high and low blade counts is really just style and aesthetics. “Windmill” styles with eight to twelve blades can feel rustic, whereas fans with two to three blades usually feel minimalist and industrial. 

How do I know what the right number is for me?

The short answer to this question is – it really doesn’t matter very much for most people. It doesn’t matter whether noise levels, energy efficiency, or aesthetics are your top priority; it’s pretty likely that you’ll be able to find a fan that will meet your needs in all three categories. 

Most often, it’s safe to shop by your style preferences first, then find a fan that meets your noise and efficiency needs from that selection. A modern, high-quality ceiling fan will be designed to work well regardless of the blade count.

If you’re looking for a quality fan that will keep you cool for years to come, stop by our showroom or give us a call. Our lighting experts are ready and waiting to help you find exactly what you need!

7 Things You Should Know About Organic Modern Interior Design

7 Things You Should Know About Organic Modern Interior Design

by ·

Organic Modern – also called contemporary rustic or transitional rustic – is an interior design style that’s become very popular in the last year as people have fallen in and out of love with sleek minimalist and farmhouse chic interiors. Organic Modern interior design is a natural next step – it incorporates the best of the minimalist design aesthetic with the warmth of natural materials. The result is an open and airy space that oozes comfort. 

If you’re looking for a way to simplify your farmhouse aesthetic or add some comfort to your minimalist space, we have good news! The shift into Organic Modern is as natural and effortless as these interiors feel.

So what is Organic Modern, exactly? We’ve put together a quick cheat sheet to help you identify the core elements of Organic Modern and find ways to incorporate it into your home.

1. Neutral colors and earthy accents

Organic Modern design is rooted in minimalist design, so keep your color palette neutral – think beige, white, tan, and gray. Keep walls and flooring light and bright to create an airy, clean feeling.

Keep in mind – a neutral palette does NOT mean monotone! Organic Modern design aims to warm up classic minimalist styling, so you’ll often see warm, deep accent colors in natural hues, like green, blue, terracotta, or orange. 

Keep in mind that your lighting can change the way your colors look. Organic Modern’s inviting neutral colors often look best in soft, warm light. We recommend buying 2-3 different colors of light bulbs and trying them in your space. You’ll be surprised at how much the colors change! 

2. Balance 

Organic Modern design strives to strike the perfect balance between sleek and streamlined minimalism and natural shapes and textures. 

Achieving this balance isn’t easy, but it’s very important. Be mindful of how many sleek versus organic pieces you incorporate. Pay attention to scale. Scatter organic shapes and textures around your space, but don’t fill it to the brim. Leave plenty of open space to keep that light, airy minimal feel. 

In this attic, they’ve artfully balanced the clean lines of the architectural details with an organic, flowy pendant light, lots of comfy blankets and pillows, and a handful of plants. 

Many homeowners forget to budget for lighting when they’re redesigning and end up with something cookie-cutter they can “hide” – but well-thought-out light fixtures are absolutely essential to creating a balanced design. 

Finding a jaw-dropping fixture that’s perfect for your space can be a challenge if you limit yourself to what you can find at your local hardware stores. If you stop by our lighting showroom, we have access to thousands of lighting options – and we’d love to help you find that unique fixture that makes your space.

3. Use natural materials

The crowning element of Organic Modern design is the consistent use of natural elements, such as stone, wood, and ceramics… and the shape, finish, and mix of pieces you choose will have a significant impact on how your room feels. Organic Modern design looks best with a mix of shapes, finishes, and materials – just like you’d find on a walk in the woods.

Balance is important here too. Natural materials tend to feel more rustic, so balance them out with modern pieces, like combining a raw-edge wooden dining table with modern seating. Stone vases and lamps introduce an earthy element, but stick to organic shapes over more ornate, traditional styles.

This living room showcases natural materials in all the right ways! The rounded, wooden elements bring the “organic” while the minimalist shape of the sofa and sleek stone fireplace bring the “modern” – married perfectly together to make a cozy Organic Modern space.

4. Bring the outside in with plants

Besides using natural elements in furniture and shapes, one of the best ways to bring Organic Modern design into your home is with plants! You’ll often see many of the same kinds of plants used in mid-century modern design (like palms, figs, and grasses) with a variety of sizes ranging from small shelf plants to larger trees and shrubs on the floor.

Plants clean your air, lift your mood, and brighten up the space. This homeowner took full advantage of their large windows and really made their plants the star of the design. They’re all in a similar color tone to the design and offer plenty of beautiful organic shapes and textures to balance out the clean lines of the furniture and architecture. 

5. Make it yours with unique and handmade pieces

Styling is one of the last steps when designing a space, and it’s the most fun because you can start making it your own! It’s an excellent opportunity to go thrifting, hit up the local flea market, or finally make that unique Etsy art purchase. 

We love how the unique shapes of the vases, prints, and light fixture here give this space so much visual interest without filling it to the brim.

Handmade pieces give your room personality, and they provide new textures and colors that are hard to find in a mass-produced decor store. When you’re looking, stay focused on finding colors and shapes that will highlight the unique balance of clean, modern, and earthy rustic pieces in your space. 

Make sure your lighting highlights your unique style! Light a cozy reading nook with your curated novel collection with a modern, organic lamp or pendant light made from natural materials. If you’re displaying your favorite finds on a bookshelf, consider adding a row of LED strip lights on the shelf above them!

6. Prioritize comfort 

Organic Modern design is minimalism made comfy. When considering your options, make sure that whatever you choose is comfortable and practical over anything else. 

What “comfortable and practical” means will vary from person to person, but here are some suggestions to get you started. 

  • Low Maintenance – Choose materials that are durable, low-maintenance, and easy to clean. There are plenty of natural materials that fit in this category, like clay, copper, finished wood, and stone.
  • Smooth Finishes – Choose materials that are “nice to the touch” – raw, natural edges are beautiful, but make sure they’re in places that won’t snag on guests’ clothes or skin. 
  • Pillows, Cushions, and Blankets – Create cozy spaces with plenty of soft textures. They’ll create an aesthetic balance against the harder natural materials while making your space so comfortable you’ll want to spend all your time there.

7. A Well-lit Space is a Comfortable Space

Proper lighting is a crucial element of any design project, but it often gets added in as an afterthought. This can cause significant problems for your space. If your finished room has dark corners, it won’t look right or feel inviting. A builders-grade traditional ceiling fixture can throw off the feel of a beautifully curated Organic Modern space. 

In the space below, this stunning light fixture brings Organic Modern design to a whole new level. But how do you replicate this in your home? We recommend considering two things when picking out a light fixture: the material choice and breaking tradition. 

Material Choice

Most default lighting includes stainless steel or brushed nickel and frosted white glass shades. Instead, play with finding fixtures with natural materials for the base or the shade. 

You might have a hard time finding anything else at a hardware store, but if you stop by a lighting showroom, they’ll be able to show you a wider selection of modern fixtures. 

Consider things like stone lamps that introduce texture, wicker pendants that soften the room, or colored shades that dimension.

Breaking Tradition

Traditional fixtures and placements work, and they’re always a safe bet. But with Organic Modern design, it’s okay to bend the rules to get a less structured look.

Don’t let the fear of a mistake stop you from trying something new. Get that funky fixture you love. Be bold with finishes and colors – great design moments happen when you choose something you love rather than playing it safe.

It’s okay to experiment with unconventional placements too! Try hanging pendant lights over your end tables instead of using lamps. Play with scale and get an oversized fixture (remember to balance your design!). 

Just give it a go – you’ll create a more interesting space. Remember – nothing in design is permanent, and your design can grow organically (right along with your houseplants) as you trade things in and out over time.

Just remember – the elements of Organic Modern are there to help guide you to a feeling more than anything, and there are no absolutes. So whether your take on Organic Modern borders on eclectic boho or modern with an emphasis on wood and stone, if you feel relaxed and connected, then you’ve created the perfect space for you.

It’s quite the balancing act! We don’t doubt that you’re up for the adventure, but if you’d like to skip the “hours of googling” phase of your lighting selection, let the experts at Illuminate Lighting do the heavy lifting and help you find what you need!